INSTALLATION SEALER FOR PRE-SEALING AND SIX SIDED SEALING
KEY FEATURES:
- Safe, Easy to Use, Breathable, AQS Technology Formula
- Reduces Picture Framing, Mineral Staining & Efflorescence
- Simplifies Grout Clean Up Process & Reduces Adhesive Blotching
- Ideal for Dip Sealing, Non Yellowing, Non Coating
Ultra-Block™ is an economical water based specialty sealer formulated for six sided, dip-sealing, underside & pre-grouting sealing. Helps resist staining caused by water soluble minerals (including picture framing effect) which are normally absorbed through the back of the stone during installation. It also helps resist ef orescence migration & adhesive blotch marks. Can also be used as a pre-grouting sealer. Allows moisture vapour transmission (MVT).
USE: For porous surfaces e.g. all natural stone like basalt, bluestone, granite, limestone, marble, quartzite, sandstone, slate, travertine etc plus encaustic tiles, terrazzo, concrete, pavers, saltillo, grout and other surfaces.
NOTE: For high traffic, commercial or food areas or where premium performance / stain resistance is required – for a natural look use AQUA-SEAL GOLD+ and for a colour enhanced, enriched look use ENHANCE’N’SEAL.
AVAILABLE SIZES
- 4 LITRE
- 15 LITRE
- 20 LITRE
DOWNLOADS:
MAINTENANCE
-
EzyClean+ for routine, everyday cleaning & disinfecting;
-
XtremeClean+ for heavy duty cleaning & disinfecting;
-
Stone Wash+ for cleaning, conditioning & disinfecting;
-
Stone Gel+ for cleaning & disinfecting vertical surfaces;
- ReFresh+ for food surface area cleaning and disinfecting;
IMPORTANT NOTE: TREAT THE SEALED UNDERSIDE SURFACE AS LOW POROSITY
Ultra-Block™ will reduce the porosity of the underside sealed surface. Please contact your adhesive supplier or manufacturer for specifcation of the appropriate adhesive suitable for installing low porosity/dense surfaces. Sealed underside surface and substrate should be thoroughly wet out with the adhesive (back butter using the flat side of trowel) prior to applying adhesive with appropriate notch trowel to ensure proper coverage and adhesion. Follow adhesive manufacturer recommendation for the appropriate adhesive & ensure relevant Standards for stone & tile installation are followed.
BEST SELLERS
-
EZYCLEAN+
BUY NOWProfessional Grade, Rinse Free and Steak free cleaner for all Stone, Tile, Terrazzo, Encaustics and Grout. Commercial Grade Disinfectant kills Odours, Bacteria & Germs. Highly Concentrated. Does NOT affect sealer performance. For indoor, outdoor, domestic and commercial areas. Safe for food preparation floor areas
-
AQUA-SEAL GOLD+®
BUY NOWUsed and trusted by Professionals. Maximum Stain Resistance against oil, food and grime. Inhibits mould and mildew growth. Aqua-Seal Gold+® is a Professional Grade below surface, penetrating type, natural look sealer. Non flammable, Non yellowing and UV resistant. For indoor, outdoor, domestic & commercial areas. LOW VOC FORMULA (<5 gm/L).
-
GRIP-IT T for TILES
BUY NOWA permanent treatment to create a slip resistant micro-texture. It is NOT a sealer or a coating. It will not peel or wear off. Makes slippery, wet surfaces safer e.g. bathrooms, swimming pool areas, balconies, living areas, main entrance etc. For glazed, unglazed ceramic, porcelain and tessellated tiles in domestic, commercial, indoor & outdoor areas. For homes, hotels, schools, child and aged care facilities etc
-
COLOUR'N'SEAL - Grout Colourant
BUY NOWProfessional Grade one-part premium grout colourant utilising a NanoPlus™ Waterbourne Modified Epoxy formula to re-colour, renew, revive and seal existing grout. Maximum Stain protection against oil, food, grease and grime. For wall, floor, indoor, outdoor, domestic and commercial areas. Available in 24 colours.
