CLEANING AND SEALING OPTIONS FOR LIMESTONE
ALL ABOUT LIMESTONE
Limestone is a sedimentary stone with at least 50% by weight calcium carbonate or or calcite. Limestone is often composed of skeletal fragments of marine organisms such as coral, molluscs or foraminifera. Due to the high content of calcium carbonate, Limestone is susceptible to etching from acid based contaminants eg wine, citrus, soft drinks. Sealing Limestone with Professional Grade sealers is recommended to offer for stain resistance and make ongoing maintenance easier.
SEALING OPTIONS FOR LIMESTONE
SIX SIDED – DIP SEALING – PRE-SEALING
- Reduces Picture Framing and Efflorescence
- Minimises Staining from Adhesive and Grout
- Helps Consolidate Stone – UV Resistant – Low VOC
- Makes Grouting and Grout Clean Up Process Easier
- Number of Coats: 1
ULTRA-BLOCK is an economical water based installation sealer for six sided, dip-sealing and pre-grout sealing. The six sided sealing process will help to consolidate the surface plus minimise efflorescence, blotching from adhesive, mineral bloom, picture framing plus staining from handling, adhesives and grout during the installation. Also helps to make grouting cleanup easier.
- NanoPlus for Deep Protection – Low VOC <5gm/L
- RapidSeal for Fast Cure – Helps Consolidate Stone
- Maximum Stain Resistance Against Oil, Food & Grime
- Clear – Non Yellowing – UV Resistant – NonFlammable
- Number of Coats: 2
- Coverage - 15 - 20 m2 per 1 litre per coat
AQUA-SEAL GOLD+® is the best recommendation for a natural look and maximum stain resistance against oil, food, grease and grime. Ideal for residential, commercial, high traffic and also for food areas. Will also seal surrounding grout. Can also be used to pre-seal before installation.
NATURAL LOOK – PREMIUM STAIN PROTECTION (SMALL AREAS)
- Easy To Use – NanoPlus for Deep Protection
- Clear – Non Yellowing – UV Resistant – NonCoating
- Maximum Stain Resistance Against Oil, Food & Grime
- Just Aim, Spray & Seal – RapidSeal Fast Drying Formula
- Number of Coats: 2
- Coverage: 3 - 5 m2 per can per coat
COLOUR ENHANCED LOOK – PREMIUM STAIN PROTECTION
- Enhance, Darken and Highlight Colour
- NanoPlus 100% Actives Formula for Deep Protection
- Clear, Non Yellowing, UV Resistant, Non Coating
- Maximum Stain Resistance Against Oil, Food & Grime
- Number of Coats: 2
- Coverage: 15 - 20 m2 per 1 litre per coat
CLEANING OPTIONS FOR LIMESTONE
WEEKLY – GENERAL CLEAN FLOOR AND WALLS
- Rinse Free and Streak free formula
- Neutral pH plus Commercial Grade Disinfectant
- Kills odours, bacteria and germs. Inhibits mould growth
- Professional Grade – Concentrate – Antibacterial Action
- Rinse free and Streak free
- Professional Grade – Concentrate
- Cleans and Re-Seals with every use
- Inhibits mould, odours, bacteria and germs
- Spray Type Cleaner, Sanitiser and Disinfectant
- Kills odours, bacteria and germs. Inhibits mould growth
- Commercial Grade Disinfectant – Kills E-Coli & S-Aureus
- Professional Grade – Ready To Use – Antibacterial Action
- Cleans & Re-Seals with every use
- Cleans Dirt, Oil, Grease and Grime
- Professional Grade – Ready To Use
- Inhibits mould, odours, bacteria and germs
- Deep Cleaner, Conditioner and Disinfectant
- Kills odours, bacteria and germs. Inhibits mould growth
- Professional Grade – Concentrate – Antibacterial Action
- Cleans dirt, grease, grime, soap scum, wax, oil and more
- Gel Type Deep Cleaner, Conditioner & Disinfectant
- Wall Clean – Dirt, grease, grime, soap scum, oil & more
- Kills odours, bacteria and germs. Inhibits mould growth
- Professional Grade – Ready To Use – Antibacterial Action
MONTHLY DEEP CLEAN FLOORS & WALLS (SMALL AREAS)
- Spray Type Heavy Duty Cleaner and Disinfectant
- Professional Grade – Ready To Use – Antibacterial Action
- Commercial Grade Disinfectant – Kills E-Coli & S-Aureus
- Kills odours, bacteria and germs. Inhibits mould growth
QUARTERLY HEAVY DUTY CLEAN FLOORS AND WALLS
- Heavy Duty Cleaner, Degreaser and Disinfectant
- Professional Grade – Concentrate – Antibacterial Action
- Kills odours, bacteria and germs. Inhibits mould growth
- Cleans built up dirt, grease, grime, soap scum, oil & more
IMPORTANT NOTE
- Read entire Product Label, SDS and Technical Bulletin before using any product.
- ALWAYS TEST A SMALL AREA to determine the ease of application & desired results.
GENERAL NOTE:
These recommendations are intended as general guidelines for all available cleaning and sealing options. Read product label, technical bulletin and SDS thoroughly prior to use. Always test first to determine number of coats, desired look, dilution of chemicals, dwell time and the final result. Sealers are not waterproofing agents and do not protect against etching by acid based contaminants or harsh chemicals.
COVERAGE NOTE:
All coverages and suggested number of coats are approximate and only as a guide. Coverage will vary depending on surface density, porosity, texture and absorption. Also weather conditions, the application method and number of coats required.