AQUA-SEAL GOLD+

PREMIUM NATURAL LOOK SEALER

• NanoPlus Formula For Deep Protection
• Low VOC <5 gm/L – Water Based Formula - Non Flammable
• Used & Trusted by Professionals – The Gold Standard
• Maximum Stain Resistance Against Oil, Food and Grime
• Natural Look – Non Yellowing – Non Coating – Non Toxic

DESCRIPTION: Aqua-Seal Gold+^(R) is a Premium, Low VOC (<5gm/L), natural look, no sheen, breathable, penetrating sealer. NanoPlus^™ Formula penetrates deeper and chemically bonds to provide Maximum stain resistance against oil, food, grease & grime plus help consolidate stone, reduce freeze/thaw damage, spalling and efflorescence. Built in RapidPlus^™ provides protection in 4 hours. Safe for food areas.

USE: For porous surfaces e.g. all natural stone like basalt, bluestone, granite, limestone, marble, quartzite, sandstone, slate, travertine etc plus porcelain tiles, encaustic tiles, terrazzo, concrete, pavers, saltillo, groutand other surfaces where a natural look and maximum stain and water resistance is required.

Note: For a colour enhanced, enriched look use ENHANCE’N’SEAL. 

AVAILABLE SIZES

• 250ML
• 1 LITRE
• 4 LITRE
• 15 LITRE
• 20 LITRE

IMPORTANT INFORMATION:

• HOW TO USE
  
• SDS
• TROUBLE SHOOTING GUIDE

MAINTENANCE

• EzyClean+ for routine, everyday cleaning & disinfecting;
  
• XtremeClean+ for heavy duty cleaning & disinfecting;
• Stone Wash+ for cleaning, conditioning & disinfecting;
• Stone Gel+ for cleaning & disinfecting vertical surfaces;
• ReFresh+ for food surface area cleaning and disinfecting;

COVERAGE:

Approx 10-40m² per 1 litre per coat.  Will vary depending on the density, porosity, texture and absorption. Also weather conditions, application method and number of coats required. Full coverage chart at SURFACE FINDER
See table below as a guide (per 1L, per coat).